4 | Page
Following are the safety instructions which must be followed by the service
partners or user while installing & operating the product. If ignored, physical
injury or even death may happen. Read the safety instructions before handling the
system.
NOTE
(Notes or attention to ensure safe operation)
Important
The manufacturer is not liable for malfunctioning if the product is not correctly
installed, damaged, modified and/or put to run beyond the working range as
given in this manual.
The manufacturer reserves the right to make any modifications to this product
from time to time.
WARNING
If these safety instructions are not observed, it may result in
malfunction or damage to the equipment.
All electrical connections must be carried out by skilled and qualified
personnel.
Never connect AC power to output L1 & N1 / L2 & N2 terminals.
Ensure the motor, controller and power specifications are matching.
CAUTION
If these safety instructions are not observed, it may result in
personal injury.
Before carrying out any installation or maintenance operation, the controller
must be disconnected from the power supply.
Don’t open the cover while the pump is running.
Don’t put wire, metal bar filament etc. into the controller.
To Next Page
Loading...
Need help?
General
