Grundfos magna3 - Product Description; Duty Range; Characteristic Features; Benefits

SETTINGS
Status icons in display footer
1
Operating mode
= Automatic night setback
= Change of settings - locked
= Connected to eldbus
= Multipump system
= Master pump (multipump system)
= Slave pump (multipump system)
= Forced local mode (eldbus is overridden)
Normal
Stop
Min.
Max.
The pump runs according to the selected control
mode. Operating mode overrules control mode.
See next page
The pump stops.
Minimum curve mode is used in periods
in which a minimum ow is required.
Maximum curve mode is used in periods
in which a maximum ow is required.
Control mode
2
AUTOADAPT
Prop. press.
Const. press.
FLOWADAPT
Const. temp.
Di. temp.
Constant ow
Constant curve
Δt
Δt
Δt
Δt
Operating mode can be externally controlled by digital input.
1
Δt
Δt
Δt