resettable
temp. measurement T1 > ...
operating hours from ..., the temperature limit
was overrun
resettable
temp. measurement T2 < ...
7)
operating hours from ...,the blocking temperature
was underrun
resettable
temp. measurement T2 > ...
7)
operating hours from ..., the temperature limit
was overrun
resettable
temp. measurement T1 < ...
number of times the blocking temperature was
underrun from ...
resettable
temp. measurement T1 > ...
number of times the temperature limit was
overrun from ...
resettable
temp. measurement T2 < ...
7)
number of times the blocking temperature was
underrun from ...
resettable
temp. measurement T2 > ...
7)
number of times the temperature limit was
overrun from ...
resettable
general version
time and date
device type
enable contact
SMS module
12)
PHP A-1 Instruction Manual / Operation and display
20
1. Only in systems PHP
2. Only if EMCF-1 V makeup module is enabled
3. Operating mode acc. to menu item settings
4. Depending on the selected operating mode
5. Only in operating mode “timer program”
6. Only in operating mode “time-controlled”
7. Only if sensor T2 is enabled
8. Only if level measurement L2 is enabled
9. Only if degassing is enabled (without bypass)
10. Only if fast degassing is activated
11. Only if softening MWE is enabled
12. Only if SMS module is enabled
13. Only if at least one value is monitored and user level 3 is active
14. Only if desalination MVE is enabled
To Next Page
Loading...
Need help?
General
