Grundfos RADIOMODULE 2G4 - Operating Panel Identification; Receiving the Product; Transporting the Product

Functional module variants
Variant Designation
FM 100 Basic functional module
FM 200 Standard functional module
FM 300 Advanced functional module
Related information
6.8 "Digital inputs"
6.8.1 Timer function for a digital input
6.9 "Digital inputs/outputs"
6.10 "Signal relay" ("Relay outputs")
2.8 Identification of the operating panel
You can identify the operating panel in one of the following ways:
Grundfos GO Remote
You can identify the operating panel in the Fitted modules menu under Status.
Motor display
For motors fitted with the advanced operating panel, you can identify the operating panel in the Fitted modules menu under Status.
Motor nameplate
You can identify the operating panel by means of the data on the motor nameplate.
Env. Type :
Seria l no :
SF CL:
PF:
PB
FM
HMIEff
n max :
CIMW gt
:
DE
:
kg
NDE
:
T
a mb
:
:
F AA
V
~
P.C.
:
Made in Hungary
OU TPUT
VARIANT
INPU T
TEFC
Typ e
:
P.N.
:
U
in
:
I
1/1
:
f
in
Hp
Hz
P2
I SF Amp:
rpm
: : :
:
:
:
:
Xxxxxxxxxxx
E.P. Motor
DK - 8850 Bjerringbro, Denmark
PB
FM
HMI
CIM
VARIANT
Hp
rpm
:
:
:
:
TM064013
Operating panel variants
Variant
Designation
HMI 100 Basic operating panel
HMI 101 Basic operating panel for motors without a radio module
HMI 200 Standard operating panel
HMI 201 Standard operating panel for motors without a radio module
HMI 300 Advanced operating panel
HMI 301 Advanced operating panel for motors without a radio module
3. Receiving the product
3.1
Transporting the product
WARNING
Falling objects
Death or serious personal injury
‐ Secure the product during transport to prevent it from tilting or falling down.
CAUTION
Crushing of feet
Minor or moderate personal injury
‐ Wear safety shoes when moving the product.
When you transport the product, pay attention to the following:
• Motors from 2.2 to 5.5 kW: Do not stack more than two motors in their original packaging.
• Motors from 5.5 to 11 kW: Do not stack the motors.
10
English (GB)