Indicator light Description
The green indicator light in the middle flashes
quickly four times.
Grundfos Eye flashes four times when you press the Grundfos Eye
symbol next to the motor name in Grundfos GO Remote.
The green indicator light in the middle is
flashing continuously.
You have selected the motor in Grundfos GO Remote, and the motor
is ready to be connected.
The green indicator light in the middle flashes
quickly for a few seconds.
The motor is controlled by Grundfos GO Remote or exchanging data
with Grundfos GO Remote.
The green indicator light in the middle is
permanently on.
The motor is connected to Grundfos GO Remote.
6. Setting the product
You can set control functions via Grundfos GO Remote or the advanced operating panel.
• If only one function name is mentioned, it refers to both Grundfos GO Remote and the operating panel.
• If a function name is mentioned in a parenthesis, it refers to a function on the advanced operating panel.
Related information
5.1.3.3 Menu overview for the advanced operating panel
5.2.2 Menu overview for Grundfos GO Remote
6.1 "Setpoint"
When you have selected the desired control mode, set the setpoint.
Related information
6.5 "Control mode"
6.2 "Operating mode"
Possible operating modes
Normal The product runs according to the selected control mode.
Stop The product stops.
Min. The product runs at minimum speed.
Max. The product runs at maximum speed.
Manual
The product is operating at a manually set speed, and the setpoint via bus and setpoint influence function are
overruled.
User-defined speed The product is operating at a speed set by the user.
6.3 "Set manual speed"
The function is only available in the advanced operating panel.
Use this function to set the speed in percentage of the maximum speed. When you have set the operating mode to Manual, the product starts
running at the set speed.
With Grundfos GO Remote, you can set the speed via the Setpoint menu.
Related information
5.1.3 Advanced operating panel
6.4 "Set user-defined speed"
Use this function to set the motor speed in percentage of the maximum speed. When you have set the operating mode to "User-defined
speed", the motor starts running at the set speed.
39
English (GB)
To Next Page
Loading...
