5.2.1.2 Infrared communication
Infrared communication can take place at distances up to 2 m.
When communicating via infrared light, Grundfos GO Remote must be pointed at the operating panel of the product.
Related information
5.2 Grundfos GO Remote
5.2.1 Communication
5.2.1.1 Radio communication
5.2.2 Menu overview for Grundfos GO Remote
Dashboard MGE Multimotor system
• •
Status MGE Multimotor system
System mode •
Resulting setpoint •
Resulting system setpoint •
Actual controlled value • •
Motor speed •
Power consumption •
Power consumption, system •
Energy consumption •
Energy consumption, system •
Acc. flow, specific energy • •
Operating hours •
Motor current •
Number of starts •
Operating hours, system •
Pt100/1000 input 1
*
•
Pt100/1000 input 2
*
•
Analog, Output
*
•
Analog input 1 •
Analog input 2 •
Analog input 3
*
•
Digital input 1 •
Digital input 2
*
•
Digital input/output 3 •
Digital input/output 4
*
•
Fitted modules •
Pump 1 •
Pump 2 •
Pump 3 •
Pump 4 •
*
Only available if an advanced functional module, type FM 300, is fitted.
Settings
MGE Multimotor system
Setpoint • •
Operating mode • •
Set user-defined speed • •
Control mode • •
36
English (GB)
To Next Page
Loading...
