Settings MGE Multimotor system
Pipe-filling function • •
Buttons on product •
Stop at min. speed •
Controller • •
Operating range • •
Ramps •
Number •
Radio communication •
Analog input 1 •
Analog input 2 •
Analog input 3
*
•
Pt100/1000 input 1
*
•
Pt100/1000 input 2
*
•
Digital input 1 •
Digital input 2
*
•
Digital input/output 3 •
Digital input/output 4
*
•
Predefined setpoint • •
Analog output
*
•
External setpoint funct. •
Signal relay 1 •
Signal relay 2 •
Limit 1 exceeded • •
Limit 2 exceeded • •
Alternating operation, time •
Sensor to be used •
Time for pump changeover
*
•
Standstill heating •
Alarm handling •
Motor bearing monitoring •
Direction of rotation •
Service •
Date and time
*
•
Store settings •
Recall settings •
Undo • •
Pump name • •
Connection code • •
Unit configuration •
*
Only available if an advanced functional module, type FM 300, is fitted.
Alarms and warnings
MGE Multimotor system
Alarm log • •
Warning log • •
37
English (GB)
To Next Page
Loading...
