Grundfos RADIOMODULE 2G4 - Page 13

2. Remove the terminal box cover.
TM064926
3. Press and hold in the two locking tabs (A) while gently lifting the plastic cover (B).
A
A
B
TM055353
4. Turn the plastic cover 180 °.
Do not twist the cable more than 90 °.
180 °
TM055354
5. Position the plastic cover correctly over the four rubber pins (C). Make sure that the locking tabs (A) are placed correctly.
A
A
C
TM055355
6. Fit the terminal box cover and make sure that it is turned 180 ° so that the buttons on the operating panel are aligned with the buttons on
the plastic cover.
13
English (GB)