Need help?Do you have a question about the Grundfos SCALA1 and is the answer not in the manual?
General| Inlet/Outlet Size | 1 inch |
|---|---|
| Weight | 10 kg |
| Mains Frequency | 50/60 Hz |
| Pumped liquid | Clean water |
| Housing Material | Composite |
| Pump Type | Self-priming, multistage centrifugal pump |
| Power Supply | 1 x 230 V |
| Liquid Temperature Range | 0°C to 45°C |
| Protection Class | IPX4D |
| System Pressure | Max. 10 bar |
| Approvals | CE, EAC |
| Installation Type | Horizontal |
Explains hazard symbols and statements for safety.
Explains symbols used for notes and tips.
Identifies the intended users for these instructions.
Details the components and features of the SCALA1 product.
Specifies the intended applications for the SCALA1 pump.
Clarifies the types of liquids the product can pump safely.
Explains the information found on the product's nameplate.
Details the SCALA1 product type designation and its components.
Steps for checking the product upon delivery against the order.
Lists the items included in the product packaging.
Guidance on suitable indoor and outdoor installation locations.
Information on ensuring the system can handle the pump's maximum pressure.
Instructions on how to correctly position and securely mount the pump.
Guidelines for connecting inlet and outlet pipes, including union nuts and thread sealing.
General precautions for connecting inlet and outlet pipes, avoiding air pockets.
Recommends installing the unit at a height not exceeding specified values.
Overview of possible inlet pipe lengths based on vertical pipe length.
Steps for connecting the product with a power plug, ensuring compliance.
Instructions for connecting products that come without a plug.
Detailed steps for priming the pump before initial startup.
Procedure to follow after installation and priming to start the pump.
Describes normal operation, including starting and stopping conditions.
Explains the run-in period for the shaft seal and potential leakage.
Description of the symbols and buttons on the operating panel.
Explains the automatic reset function for alarms.
Details the dry-running protection mechanism.
Describes the anti-cycling function to prevent frequent starts/stops.
Explains the maximum runtime function to prevent continuous operation.
Guide to the initial setup wizard using the Grundfos GO Remote app.
Details advanced settings available through Grundfos GO Remote.
How to configure external inputs for additional pump control conditions.
Safety precautions and steps for setting up external input.
Example of using external input for roof tank filling.
How to schedule pump operation using the calendar function.
Steps to enable the calendar function via Grundfos GO Remote.
Overview of the different performance modes available for SCALA1.
Instructions on how to change the pump's performance mode.
Procedures for resetting the pump to its default factory settings.
Describes the Duty/Standby and Duty/Assist operation modes for twin systems.
How to set up the twin booster system using Grundfos GO Remote.
Detailed steps for configuring the twin booster system via the app.
Recommendations for routine maintenance of the pump.
Step-by-step guide to cleaning the condensation plugs.
Instructions for cleaning the integrated non-return valve.
Information on where to find service parts and support.
Information on available service kits for the product.
Steps to unblock the pump shaft if it seizes up.
Explains how the Grundfos Eye indicator shows the operating status.
Troubleshooting guide for when the pump fails to start.
Troubleshooting guide for when the pump is not running.
Troubleshooting guide for common issues when the pump is running.
Troubleshooting guide for when the pump stops unexpectedly during operation.
Troubleshooting guide for reduced pump performance.
Troubleshooting guide for frequent pump cycling.
Troubleshooting guide for when the pump fails to stop.
Troubleshooting guide for electric shock hazards.
Troubleshooting specific to twin booster system configurations.
How to reset faults manually or via auto reset function.
Lists operating parameters like temperature, pressure, and flow rates.
Details mechanical specifications like pipe connections.
Electrical specifications including voltage, power, and current ratings.
Physical dimensions and weight of the SCALA1 product.
Technical details about the Bluetooth communication.
Information on FCC compliance and RF exposure limits.
Guidelines for safely disposing of the product and its materials.
To Next Page
