A soundproofed group consists, just like a stationary, of a motor-alternator Monoblock,
base frame and a control panel.
This genset will be set inside a cabin or in a shipping container, in case of larger groups.
Both in one case as in the other, the inside will be soundproofed to minimize the maximum
noise produced by the engine. For such, different materials will be used depending on the
required attenuation.
01.2. SOUNDPROOFED GENSET
Figure 4 – Soundproofed genset in container
Figure 5 – Soundproofed genset in cabin
Figure 3 – Soundproofed genset in cabin
To Next Page
Loading...
