GS corpuls3 - Usage other than as intended

17ENG - Version 2.2 - P/N 04131.02
Fax Transmission to a Fax Machine
1. Record a diagnostic ECG.
2. After the message "D-ECG measured" is displayed, press
the softkey [Send]. The phonebook overview with pre-con-
gured destinations appears.
3. Select the required destination or "Manual destination" with
the jog dial and press to conrm.
4. Symbol Fax: Fax transmission started. .......................
Symbol Fax with conrmation tick:
Fax transmission has been successful. ......................
Symbol Fax with exclamation mark:
Fax transmission failed. ..............................................
5. By pressing the softkey [Cancel] the patient monitoring mode
can be called up again. The fax transmission is carried out in
the background.
6. To abort the current fax transmission, select in the main
menu "Telemetry"

"Abort Fax".
Data Transmission to corpuls.web
1. In the main menu, select "Telemetry"

"Connect".
2. The log-in to the corpuls.web server is initiated.
The symbol corpuls
3
/server with two arrows indi-
cates that the data connection between corpuls.web
and corpuls
3
has been established.
3. To exit the current live data transmission, select in the main
menu "Telemetry"

"Disconnect".
Data Transmission via Bluetooth
®
Interface
1. In the main menu, select "Bluetooth"

"Connect".
The overview of pre-congured Bluetooth
®
connections
opens.
2. Select the device to be connected or "Manual destina-
tion" with the jog dial and press to conrm. The symbol
Bluetooth indicates that a connection to an external
system has been established via the Bluetooth
®
interface.
3. To abort the current Bluetooth
®
connection, select in the main
menu "Bluetooth"

"Disconnect".
Telemetry/Data Management