GS corpuls3 - Separating the Compact Monitor; Connecting the Compact Monitor

5ENG - Version 2.2 - P/N 04131.02
Separating the Compact Monitor
1. Grasp the compact monitor
by the carrying handle
and pull both snap locks
simultaneously forwards
and upwards (item A) or
push them rearwards and
downwards (item B).
2. Tilt the monitoring unit for-
wards (item C) and remove
upwards (item D).
Connecting the Compact Monitor
1. Lift the compact monitor, tilt and t both pins (item 1) in the
two recesses (item 2) at the debrillator/pacer (item A).
2. Tilt the compact monitor towards the debrillator/pacer
(item B) until the closures (item 3) perceptibly engage
(item 4) at the debrillator/pacer.
Separating and Connecting Compact
Monitor and Defibrillator
A
B
C
D
A
B
C
D
1
2
3
4