DA98A AC Servo Drive Unit
User Manual
WARNINGS
● Design and manufacturing of the product are not used for the mechanism and
system that may cause danger to people.
● Precautions in design and making of the user machinery and system matched with
this product should be taken into account to avoid accidents resulted by
mal-operation or malfunction of this product.
Warning
Acceptance
● Product that is damaged or broken down can’t be put into use.
Caution
Transportation
● Products should be stored and delivered in a proper storage and delivery
environment.
● Do not put the packing boxes in too high piles to prevent from falling down.
● Proper package should be done for the product loading.
● Do not drag the servo motor wires, shaft or encoder when moving it.
● Prevent the servo drive unit and the servo motor from external force and collision.
Caution
Installation
For AC servo drive unit and servo motor:
● Do not fix them on or near flammable objects that fire may occur.
● Vibration should be avoided and protect them from shock.
● Don’t assembly the product that is damaged or lack of parts.
For AC servo drive unit:
● It should be fixed in a control cabinet with a high protection degree.
● Sufficient clearance with other equipments should be set aside.
● A good heat radiation should be done.
● Prevent dust, corrosive gas, conductive objects, liquids and flammable or explosive
material against entering it.
For servo motor:
● Fastness must be assured to avoid looseness by shaking.
● Prevent liquids from entering motor and encoder.
● Hammering motor and its shaft is unallowed to protect encoder from damage.
● Don’t overload the motor shaft.
Caution
VII
To Next Page
Loading...
