Need help?Do you have a question about the Gutermann ZONESCAN and is the answer not in the manual?
Displays symbols used in the manual and their meanings.
Outlines general safety precautions for operating the equipment and software.
Specifies the intended industrial use of ZONESCAN products for leak detection.
Introduces the ZONESCAN INSTALL app for water leak detection systems.
Lists the main features of the ZONESCAN INSTALL application.
Instructions on how to charge the Communication Link using the provided charger.
Details the minimum and recommended requirements for Android devices.
Guides users on how to install the ZONESCAN INSTALL app from the Play Store.
Explains the function and contents of the app's Action Bar for navigation and functions.
Outlines the steps for the initial app setup wizard, including permissions and company name.
Explains the complete setup process for NB-IoT loggers from ZSNet.
Details the required gateway settings for establishing contact with the Gutermann gateway.
Guides on configuring the NB-IoT logger, including cable connections.
Describes the options available in the navigation drawer for NB-IoT projects.
Explains how to import NB-IoT projects to ensure the most recent configuration.
Details how to add an NB-IoT logger using the 'Logger Setup' option.
Steps to finalize NB-IoT logger deployment and upload data to ZSNet.
Introduces NB-IoT maintenance, covering device configuration, state, and logs.
Explains how to put NB-IoT loggers into sleep mode to save battery life.
Guides on performing firmware updates for NB-IoT loggers.
Covers the step-by-step procedure for setting up a new ALPHA project.
Details how to configure mail server settings for ALPHA projects.
Describes the options available in the navigation drawer for ALPHA projects.
Explains how to import ALPHA projects to prevent data inconsistencies.
Guides on waking up devices from sleep mode before deployment.
Details the process of setting up and adding ALPHA devices to a project.
Describes how to add a measurement point, typically a Repeater and a Logger.
Emphasizes the importance of the connection test for device reliability and battery life.
Explains how to upload project changes to ZONESCAN net.
Covers maintenance tasks for ALPHA devices, including details, settings, and test emails.
Details maintenance procedures for repeaters, including settings and connection tests.
Outlines maintenance tasks for loggers, including details, settings, and radio status.
Guides on troubleshooting and repairing issues with loggers or projects.
Instructions on how to delete local project data from the application.
Explains how to view connected devices on the map using the list view.
Describes device navigation, moving, redeploying, and maintenance via context menu.
Steps to change app default permissions from 'always' to 'just once' on Android.
Instructions on how to clear the application cache on an Android device.
Displays symbols used in the manual and their meanings.
Outlines general safety precautions for operating the equipment and software.
Specifies the intended industrial use of ZONESCAN products for leak detection.
Introduces the ZONESCAN INSTALL app for water leak detection systems.
Lists the main features of the ZONESCAN INSTALL application.
Instructions on how to charge the Communication Link using the provided charger.
Details the minimum and recommended requirements for Android devices.
Guides users on how to install the ZONESCAN INSTALL app from the Play Store.
Explains the function and contents of the app's Action Bar for navigation and functions.
Outlines the steps for the initial app setup wizard, including permissions and company name.
Explains the complete setup process for NB-IoT loggers from ZSNet.
Details the required gateway settings for establishing contact with the Gutermann gateway.
Guides on configuring the NB-IoT logger, including cable connections.
Describes the options available in the navigation drawer for NB-IoT projects.
Explains how to import NB-IoT projects to ensure the most recent configuration.
Details how to add an NB-IoT logger using the 'Logger Setup' option.
Steps to finalize NB-IoT logger deployment and upload data to ZSNet.
Introduces NB-IoT maintenance, covering device configuration, state, and logs.
Explains how to put NB-IoT loggers into sleep mode to save battery life.
Guides on performing firmware updates for NB-IoT loggers.
Covers the step-by-step procedure for setting up a new ALPHA project.
Details how to configure mail server settings for ALPHA projects.
Describes the options available in the navigation drawer for ALPHA projects.
Explains how to import ALPHA projects to prevent data inconsistencies.
Guides on waking up devices from sleep mode before deployment.
Details the process of setting up and adding ALPHA devices to a project.
Describes how to add a measurement point, typically a Repeater and a Logger.
Emphasizes the importance of the connection test for device reliability and battery life.
Explains how to upload project changes to ZONESCAN net.
Covers maintenance tasks for ALPHA devices, including details, settings, and test emails.
Details maintenance procedures for repeaters, including settings and connection tests.
Outlines maintenance tasks for loggers, including details, settings, and radio status.
Guides on troubleshooting and repairing issues with loggers or projects.
Instructions on how to delete local project data from the application.
Explains how to view connected devices on the map using the list view.
Describes device navigation, moving, redeploying, and maintenance via context menu.
Steps to change app default permissions from 'always' to 'just once' on Android.
Instructions on how to clear the application cache on an Android device.
General| Battery Life | 8 hours |
|---|---|
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| Protection Class | IP54 |
| Power Supply | 3.7 V Li-Ion battery |
To Next Page
