ZONESCAN INSTALL User Manual page – 1
1 Safety Instructions
It is essential to read the operating instructions carefully and completely before using the equipment
and software for the first time. They contain important information on safety, installation, and use. Keep
these instructions in a safe place.
1.1 Symbols
1.2 General Safety
The operating and maintenance personnel must read the instructions carefully before using
the equipment. Knowing all the information contained therein - in particular the warning and
safety instructions - is needed for the safe operation of the equipment, and to protect
yourself and others against potential dangers. Ignoring the warning, safety, and operating instructions
can cause injury, damage, or a considerable shortening of the equipment lifetime. Do not make any
changes or alterations to our products.
When using the software or the equipment, make sure you adhere to any applicable regulations, in
particular traffic regulations.
In case of any questions, ask your Gutermann representative.
1.3 Intended Use
ZONESCAN products, hardware, software, and accessories are exclusively intended for industrial use
and exclusively intended for leak detection on water pipes of the public water supply. In particular,
these products are not intended to be used on wastewater and gas pipes. Gutermann is not liable for
any damage caused by misuse, improper operation, and as a result of non-compliance with safety
instructions and warnings.
To Next Page
Loading...
Need help?
General
