GVA GVALEDC19J - Remote Control Setup

20
Remote Control Setup
1. Open the cover.
2. Your remote requires 2X AAA Batteries. When inserting the batteries, make sure correct
polarity marks”+”and “-” on the batteries match the diagram as shown within the battery
compartment.
3. Replace the battery cover.
To prevent battery leakage which may result in bodily injury or damage to the remote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc) Remove batteries
when the remote is not used for a long time.
3. Recommend using ALKALINE type batteries.
20
Remote Control Setup
1. Open the cover.
2. Your remote requires 2X AAA Batteries. When inserting the batteries, make sure correct
polarity marks”+”and “-” on the batteries match the diagram as shown within the battery
compartment.
3. Replace the battery cover.
To prevent battery leakage which may result in bodily injury or damage to the remote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc) Remove batteries
when the remote is not used for a long time.
3. It is recommended that you use ALKALINE type batteries.