Moves the waveform horizontally
(page 84).
Selects the horizontal scale (page
84).
Moves the waveform vertically
(page 90).
Configures the vertical scale and
coupling mode for each channel
(page 90).
Selects the vertical scale (page 90).
Accepts input signals: 1MΩ±2%
input impedance, BNC terminal.
Accepts the DUT ground lead to
achieve a common ground.
Performs math operations (page
62).
Facilitates transferring waveform
data, display images, and panel
settings (page 106).
Probe
compensation
output
Outputs a 2Vp-p, square signal for
compensating the probe (page
129) or demonstration.
Accepts an external trigger signal
(page 95).
Powers the oscilloscope on or off.
To Next Page
Loading...
