GW Instek GDS-207 - Configure Autoset Mode

OPERATION
103
Configure Autoset Mode
Background
There are two operating modes for the Autoset
function: Fit Screen Mode and AC Priority
Mode. Fit Screen Mode will fit the waveform to
the best scale, including any DC components
(offset). AC Priority mode will scale the
waveform to the screen by removing any DC
component.
Steps
From the Utility menu, press Autoset Mode and
select the mode.
Autoset Mode
Fit Screen Priority, AC Priority
Example 2VPP
signal with 2V DC
offset
Fit Screen
AC Priority