GETTING STARTED
33
Setting the System Date & Time
The GDS-200/300 will keep the date and time
settings saved so long as the battery is not
allowed to fully discharge.
1. Access the Menu tray by tapping the title bar.
2. Press Utility>System>Date&Time.
The Date&Time menu will appear.
3. To set the date, press Date and use the number
picker to set the year, month and day.
4. To set the time, press Time and use the number
picker to set the hour and minute.
5. Press OK to save the date and time settings.
The date and time settings only remain saved if
the battery is not fully drained. However, if the unit
shuts down due to insufficient battery power, there
will usually still be enough battery power to keep
the internal clock running for sometime.
To Next Page
Loading...
