GW Instek GDS-207 - Viewing Automatic Measurements

OPERATION
89
LFR
Time between:
Source 1 first falling edge and
Source 2 last rising edge.
LFF
Time between:
Source 1 first falling edge and
Source 2 last falling edge.
Phase
The phase difference of two signals,
calculated in degrees.
360x
t2
t1
Viewing Automatic Measurements
Background
There are two different display options for
automatic measurements. A minimized and a
maximized view*.
The minimized view will display the real-time
measurement results.
The maximized view will display the real-time,
mean, minimum and maximum measurement
results.
Note
*The minimized view is only applicable in the
landscape viewing mode. The vertical viewing
mode displays automatic measurements in the
maximized view by default and will always be
displayed on screen.