GW Instek GDS-207 - Page 88

GDS-200 & GDS-300 Series User Manual
88
–Width
Negative pulse width.
Duty Cycle
Ratio of signal pulse compared
with whole cycle. =100x (Pulse
Width/Cycle)
+Pulses
Measures the number of positive
pulses.
-Pulses
Measures the number of negative
pulses.
+Edges
Measures the number of positive
edges.
-Edges
Measures the number of negative
edges.
Delay Measurement
FRR
Time between:
Source 1 first rising edge and
Source 2 first rising edge.
FRF
Time between:
Source 1 first rising edge and
Source 2 first falling edge.
FFR
Time between:
Source 1 first falling edge and
Source 2 first rising edge.
FFF
Time between:
Source 1 first falling edge and
Source 2 first falling edge.
LRR
Time between:
Source 1 first rising edge and
Source 2 last rising edge.
LRF
Time between:
Source 1 first rising edge and
Source 2 last falling edge.