GW Instek GDS-207 - Saving and Configuring Images, Waveforms and Setups All at Once

OPERATION
133
Saving and Configuring Images, Waveforms and Setups All
at Once
Background
Images, Waveforms and Setup files can all be
saved at the same time into a directory at the
same time using the All option.
All File Contents
All the files are saved, by default, to a directory
named AXXXX, where XXXX is a number that
is incremented each time a save operation is
performed.
AXXXX.PNG
Image file
AXXCH1/2.LSF
Waveform save file
DSXXXX.SET
Setup up file
Save All
1. From the Save menu, press the All tab.
2. To save, press the Save button at the bottom of
the All tab.
An image file, setup file and waveform files
will be saved into the configured destination.
See below for the configuration details.
All
tab
Save
button
Destination
3. Press Destination to set the destination: