GW Instek GDS-207 - Recalling Setups

GDS-200 & GDS-300 Series User Manual
138
Recalling Setups
Background
Setup files can be recalled from the internal Set
(setup) memories or from the internal disk.
Setup Recall
Items
From
Selects the source setup.
Recall Setup
1. From the Recall menu, press the Setup tab.
2. To recall, press the Recall button at the bottom
of the Setup tab.
The setup will be recalled from the configured
source. See below for the configuration details.
Setup
tab
Recall
button
From
3. Press From to set the source:
Set
Set 1 - Set 20
Press Edit label to set a label for
the selected setup slot.
File
Pressing File will allow you to
select a source file (XXXX.SET)
from the internal disk.