GDS-200 & GDS-300 Series User Manual
54
Press the Invert toggle switch to invert the
waveform for the selected channel.
Press the Bandwidth Limit toggle switch to turn
the bandwidth limit on or off.
When the voltage scale is changed, the Expand
function designates whether the signal expands
from the center of the signal or from the signal
ground level. Expand by Center can be used to
easily see if a signal has a voltage bias. Expand
by Ground is the default setting.
1. Press the Expand key to set the expand mode
for all the displayed waveforms.
2. Choose the expansion type in the Expand menu
that appears.
To Next Page
Loading...
