GW Instek GDS-207 - Page 79

OPERATION
79
AC Priority
AC Priority mode will scale
the waveform to the screen
by removing any DC
component.
Steps
1. From the main display press the
Autoset key.
2. The waveform will appear on the display.
3. For a few seconds you will have the option to
press Undo? to undo the autoset
configuration.
Autoset Mode
1. Long press Autoset to bring up the Autoset
Mode menu.
2. Press the appropriate check-box to select Fit
Screen or AC Priority.
Note
The Autoset Mode menu can also be accessed via
the Utility menu, see page 103 for details.