GW Instek GDS-2072A - Set the Waveform Intensity Type

CONFIGURATION
127
Set the Waveform Intensity Type
Background
The intensity gradient of a signal can be set to
grayscale or color. If intensity is set to color, the
intensity gradient is analogous to a thermal color
gradient where high intensity areas are colored red
and low intensity areas are colored blue.
Panel Operation
1. Press the Display menu key.
Display
2. Press Waveform from the bottom
menu to toggle the intensity type.
Range
Gray, Color
Example
w ww . . co m
information@itm.com1.800.561.8187