REMOTE CONTROL CONFIG
235
GPIB Functionality Check
To check that the GPIB connection is working,
National Instruments Measurement & Automation
Explorer (MAX) can be used. The following
function check is based on version 4.6.2.
1. Start the NI Measurement and
Automation Explorer (MAX)
program. Using Windows, press:
Start>All Programs>National
Instruments>Measurement & Automation
2. From the Configuration panel access;
My System>Devices and Interfaces>GPIB0
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
