GW Instek GOM-802 - Power up

GOM-802 User Manual
18
Power Up
1. Ensure that the correct voltage is lined up with the
arrow on the fuse cover on the rear panel.
100V 120V 220V 230V
100
220
120
230
100
220
120
230
100
220
120
230
100
220
120
230
Steps
2. Connect the power cord to the AC Voltage input.
2
2
0
1
0
0
120
230
CAUTION
Ensure the ground connector of the power cord is
connected to a safety ground. This will affect the
measurement accuracy.
3. Press the main power switch on the front panel.
P
O
W
E
R
4. The display will light up and show the last setting
used before the last shut down.