GW Instek GOM-802 - Percentage Display as Percentage

MEASUREMENT
31
Note
Pressing SHIFT before pressing ENTER will exit the
Buzzer function settings.
Display as Percentage
Background
In the compare function, the measured value can be
displayed as a percentage of the Normal value rather than
the actual value.
For example, if the Normal value is 20.000, and the
actual value is 10.000, then as a percentage it would be
displayed as 50.00%.
1. Select Buzzer
Function
Press the SHIFT key and then press
the REL
%VALUE
.
SHIFT
2. Percentage
display appears
3. Return to
normal display
Press the SHIFT key and then press
the REL
%VALUE
.
Note
The Auto-range function will be disabled when using the
percentage display.