GW Instek GOM-802 - Save Compare Settings

GOM-802 User Manual
28
Use the Up and Down arrow keys to
edit the value of the selected digit.
Range 000~999
Press ENTER to confirm the
setting.
4. LO limit
setting
Press LOW
to set the LO
percentage limit.
Use the Left and Right arrow keys to
select a digit. The selected digit will
flash.
Use the Up and Down arrow keys to
edit the value of the selected digit.
Range 000~999
Press ENTER to confirm the
setting.
Save Compare Settings
Background
The save function saves the Normal, High and Low limit
settings in memory. If these values are not saved, the
settings will be lost after exiting Compare mode.
Up to 20 Normal, High, Low settings can be saved on
the GOM-802.
1. Select Save
mode
Press SHIFT +
RECAL
L
to access
the RECALL/SAVE mode.
Press the Up and Down arrow key
to show “SAVE” in the main display,
as shown above.