GW Instek GOM-802 - Buzzer Buzzer Function

GOM-802 User Manual
30
2. Select memory
location
Use the Left and Right arrow keys to
select a digit. The selected digit will
flash.
Use the Up and Down arrow keys to
edit the value of the selected digit.
Range 00~19
Press ENTER to confirm the
setting.
A
fter saving the settings, the meter will return to the
compare mode function.
Note
Pressing SHIFT before pressing ENTER will exit the Recall
mode.
Buzzer Function
Background
The buzzer function can make the buzzer sound when
the compare test has passed (GO) or failed (NOGO).
The buzzer settings are only applicable in Compare
mode.
1. Select Buzzer
Function
Press the SHIFT key and then press
LOW key.
2. Buzzer
function display
appears
Press the Up and Down arrow key
to choose the buzzer mode.
NON Buzzer function off
bF Buzz on Fail (No Go)
bP Buzz on Pass (Go)
Press ENTER to confirm the
selection.