GW Instek GOM-802 - Resistance Measurement

MEASUREMENT
23
Resistance Measurement
1. Select the
Resistance
function.
Press SHIFT + COMP
T
EMP
to
access the main function mode.
Press the Up and Down arrow keys
to select resistance measurement
mode (shown above).
There are three different modes:
(resistance), (temperature)
and
(temperature compensation)
mode.
Press ENTER to confirm
2. Resistance
mode display
appears.
Auto Indicates automatic ranging
mΩ
Milliohms
Ω
Ohms
kΩ
Kilo ohms
3. Connect the
test lead and
measure
4-wire resistance:
Use the SOURCE HI and
the SOURCE LO port for
measurement, and the
SENSE HI, and SENSE LO
port for sensing.
Note
W
hen switching from a high range to a low range, please
allow a moment for the circuits to settle before
measuring.