GW Instek GPP-3323 - Page 152

GPP Series User Manual
152
Example
: RECOrder2:USB usb:\R001.CSV
Save the CH2 recorded file with specified name ”
R001.CSV” to the enternal storage.To set record
period and saving location is Not permitted when
recorder is enabled. Therefore, preset required
saving location prior to enabling recorder.
Instrument will automatically save recorded file
with specified name to the specified saving location
when recorder is disabled.
Command
: RECOrder:PERIod <value>
Function
Sets the record period of recorder.
Description
<value> ranges from 1s to 300s. Instrument
samples and saves output intervals of all channels
when recorder is enabled.
Example
:RECOrder:PERIod 5
Sets the recorded period of recorder as 5s.
Command
: RECOrder:PERIod?
Function
Sets the recorded period of recorder.
Example
:RECOrder:PERIod?
Queries the recorded period for the current
recorder. Returns to integer between 1 to 300.
Command
:RECOrder [:STATe] {ON|OFF}