GPP Series User Manual
94
Description of Using Flash Drive
It can be used when upgrading the software
upgrades, screenshot operation and importing
or exporting files. Flash drive only support
USB2.0/USB3.0,FAT32 file system,16G MAX.
Insert flash driver into the USB Host port.
Then the system identifies the flash driver and
the indentification appears in the status bar.
In the target interface, press System button >
F3 (Setting) > F5 (Hardcopy) button and rotate
the scroll wheel (Encode) to locate the target
interface followed by pressing Enter key to
save screenshot. A confirm voice will sound
when successful.
The file format of screenshot is *.BMP and is saved
in the root directory of flash drive by default.
To Next Page
Loading...
Need help?
General
