GW Instek GPP-3323 User Manual

GETTING STARTED
31
Turning the Output On/Off
Panel Operation
Press the Output key of
each channel
individually to turn the
output on. The Output
key will light-up when
the output is on.
When the output is
turned on, pressing the
Output key again will
turn the output off.
Press ALL ON/OFF key
when it needs to output
or turn off all channels
simultaneously (GPP-
1326 does not have this
button) .
Command Set
Refer to page 113 for more details on remote
commands chapter.
Automatic
Output Shut
Down
Any of the following actions will cause the
output to be automatically shut down:
 Toggle between power output and load mode
 Independent/Tracking Series/Tracking Parallel
operation
 Recall the saved setting
 OVP/ OCP/OPP/OTP protection is tripped.
 When Sequence/Delay/Monitor/Control IO
fits the set conditions.

GW Instek GPP-3323 Specifications

General

Brand	GW Instek
Model	GPP-3323
Category	Power Supply
Language	English