GW Instek GPP-3323 - Specifications

GPP Series User Manual
204
Specifications
The specifications apply under the following conditions: The GPP series
is powered on for at least 30 minutes, within +20° C -+30°C.
Power Mode
Output
Rating
CH1/CH2
Independent
0 - 32.000V , 0 - 3.0000A(1326: 0 - 6.0000A)
CH1, CH2
Series
0 - 64.000V , 0 - 3.0000A
CH1, CH2
Parallel
0 - 32.000V , 0 - 6.0000A
CH3
0 - 5.000V, 0 - 1.0000A (4323)
CH4
0 - 15.000V, 0 - 1.0000A(4323)
Voltage
Line
regulation
≤ 0.01% + 3mV
Load
regulation
≤ 0.01% + 3mV (rating current ≤ 3A)
≤ 0.02% + 5mV (rating current > 3A)
Ripple &
noise
(5Hz-1MHz)
≤0.35mVrms,
≤0.5mVrms(1326)
≤1mVrms(4323:CH3/CH4)
Transient
recovery
time
≤ 50µs , (1326: ≤100µs)
(50% load change，minimum load 0.5A)
Temperature
coefficient
≤ 300ppm/°C
Current
Line
Regulation
≤ 0.2% + 3mA
Load
Regulation
≤ 0.2% + 3mA
Ripple &
noise
≤ 2mArms
≤4mArms (1326)
Tracking
Operation
Tracking
error
≤ 0.1% +10mV of Master (0 - 32V) (No Load,
with load add load
regulation≤100mV)
Parallel
regulation
Line： ≤ 0.01% + 3mV
Load：≤ 0.01% + 3mV (rating current ≤ 3A)
≤ 0.02% + 5mV (rating current > 3A)