GW Instek GPP-3323 - Measurement Commands

REMOTE CONTROL
123
Command Details
When using commands to select a specific channel, [1] stands for
CH1, [2] stands for CH2, [3] stands for CH3, [4] stands for CH4. "1"
can be omitted when you want to select CH1 as it is selected by
default. However if you wish to select CH2, "2" must be selected.
Measurement Commands
Command
:MEASure[1|2|3|4] :<function>?
Function
Performs a “READ?” query on the specified
measurement function.
Description
<function>
CURRent[:DC]:Measures the current.
VOLTage[:DC]:Measures the voltage.
POWEr[:DC]:Measures the power.
Example
:MEASure2:CURRent?
Reads back the CH2 current value.
Note
About CH3 of GPP-3323, The query voltage will
return the set value, current and power will return
zero.
Command
:MEASure[1|2|3|4]:ALL?
Function
Query the all measurement functions
Example
:MEASure2:ALL?
Reads back the CH2 voltage ,current and power
value
Note
About CH3 of GPP-3323, Please refer to
" :MEASure[1|2|3|4] :<function>?"
Command
:MEASure:<function>:ALL?