To Next Page

To Previous Page

REMOTE CONTROL

173

Description

POSItive|NEGAtive

Positive polarity (POSItive): when trigger condition

is met, it will output the actively specified output

signal.

Negative polarity (NEGAtive) when trigger

condition is met, it will invert and then output the

actively specified output signal.

Example

:TRIGger:OUT:POLArity D0,POSItive

Sets the polarity of the output signal from the

trigger input of D0 data line as POSItive.

Command

:TRIGger:OUT:POLArity? {D0|D1|D2|D3|D4}

Function

Queries the polarity of the output signal from the

trigger input of the specified data line.

Example

:TRIGger:OUT:POLArity? D0

Returns the polarity of the output signal from the

trigger input of D0 data line.

Command

:TRIGger:OUT:SOURce

{D0|D1|D2|D3|D4},{CH1|CH2|CH3|CH4}

Function

Sets the controlled channel from the trigger output

of the specified data line.

Description

CH1|CH2|CH3|CH4

Any of the channels, CH1, CH2, CH3, CH4 is

available for selection as controlled channel of

trigger output.

Example

:TRIGger:OUT:SOURce D0,CH1

Sets the controlled channel from the trigger output

of D0 data line as CH1.

Command

:TRIGger:OUT:SOURce?{D0|D1|D2|D3|D4}

GW Instek GPP-3323 User Manual

Questions and Answers: