GW Instek GPP-3323 - Page 8

GPP Series User Manual
8
Fuse
WARNING
 Fuse type: 100V/120V：T6.3A/250V，
220V/230V：T3.15A/250V
 To prevent fire, replace the fuse only with the
specified type and rating.
 Disconnect the power cord before replacing the
fuse.
 Make sure the cause of fuse blowout is fixed
before replacing the fuse.
Cleaning the
power supply
 Disconnect the power cord before cleaning the
oscilloscope.
 Use a soft cloth dampened in a solution of mild
detergent and water. Do not spray any liquid
into the oscilloscope.
 Do not use chemicals containing harsh products
such as benzene, toluene, xylene, and acetone.
Operation
Environment
 Location: Indoor, no direct sunlight, dust free,
almost non-conductive pollution (Note below)
 Relative Humidity: < 80%
 Altitude: < 2000m
 Temperature: 0° C to 40° C