GW Instek PSP-2010 - Current Limit Settings

PSP Series User Manual
18
Voltage Limit Settings
The voltage limit settings determine the maximum
voltage output for the power supply.
Panel operation
1. Press the V LIMIT key. The U-const
icon will flash.
V LIMIT
2. Use the scroll wheel to adjust the
voltage limit in the U-const field.
3. Press ENTER to confirm the limit
setting.
ENTER
L I M I TS
Ou t pu t
Of f
U- co n s t
I -c on s t
P - c o ns t
Range
0~Rating
Step resolution
1 volt
Max Limit
4. Hold the V LIMIT key for 2 seconds to
set to the rating voltage and to exit.
V LIMIT
Clear
5. The CE key can be pressed to clear the
voltage limit to the previous value
when editing. This will also cancel
editing the voltage limit and exit.
CE
Note
Editing the voltage limit will automatically
adjust the power limit.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com