GW Instek PSP-2010 - Percentage Offset Settings

OPERATION
23
Percentage Offset Settings
The power supply output can be increased or
decreased by a set percentage. For example, if the
voltage output is 10V, and the +% value is 110,
then the voltage will increased to 110%, making
the final voltage 11V.
Panel operation
1. Ensure the Output is off.
Page 22
2. Press the + % key or the -% key.
+%
3. Use the scroll wheel to adjust the %
setting.
4. Press Enter to confirm the setting and
exit.
ENTER
Range
(-%)
50~100
(+%)
100~150
Step resolution
1 %
Exit
5. Press CE to cancel and exit.
CE
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com