injury and can damage the back
door.
NOTICE
〉
When the ambient temperature is
lower than 0℃, the back door sup-
port rod may not be able to automat-
ically push the back door up. In such
cases, you can manually lift the back
door to open it.
〉
Do not install heavy accessories on
the back door.This can prevent the
support rod from smoothly pushing
the back door up.
Anti-pinch function
If the back door hits an obstacle while
automatically closing, it will automatical-
ly return to the open position.
Setting the opening angle
If you need to set the opening angle of
the back door, use the following steps:
1. Open the back door, adjust it to the
height that you want and hold it
there.
2. Press and hold the close button on
the back door until the vehicle gives a
light signal. Then the opening angle
of the back door is set successfully.
Emergency unlock
1. Pry down the emergency cover plate
at the bottom of inner side of the
back door using a athead screwdriv-
er.
6902A399A857
NOTICE
Please wrap the head of the screwdriv-
er with a cloth before removal.
2. Toggle the emergency opening de-
vice counter-clockwise in the direc-
tion shown in the gure with a at-
head screwdriver to open the back
door.
Manual back door
1FA59C1D4C17
27
1
Operation
To Next Page
Loading...