46
Network data
encryption module
Applicable firewalls and slots Applicable software version
• F1090: Slots 1 through 4
NSQM1F1KGMC
• F1020: Slot 1
• F1030/F1050/F1060/F1070/F1080:
Slots 1 and 2
• F1090: Slots 1 through 4
• F1020/F1030/F1050/F1060/F1
070/F1080: E9337 and later
• F1090: E8601P07 and later
Hard disks
CAUTION:
The hard disks are not hot swappable.
Table 12 describes the compatibility between hard disks and F10X0 firewalls.
Table 12 Hard disk compatibility with F10X0 firewalls
Hard disk F1005/F1010
F1020/F1030/
F1050/F1060
F1070/F1080 F1090
NS-SSD-480G-SATA-SFF Yes Yes Yes Yes
NS-HDD-500G-SATA-SFF No Yes No No
NS-HDD-1T-SATA-SFF No Yes No No
Power modules
The F1070/F1080/F1090 firewall comes with power module slot PWR0 installed with a filler panel
and power module slot PWR1 empty. It supports both AC and DC power modules. No power
modules are provided with the firewall. Prepare power modules for the firewall yourself as required.
The F1070/F1080/F1090 firewall supports hot swapping of power modules and 1+1 power module
redundancy. To install two power modules for the firewall, make sure they are the same model.
Table 13 Power modules available for the firewall
Firewall model Available power modules
F1005/F1010 One built-in power module
F1020/F1030/F1050/F1060 Two built-in power modules
F1070/F1080 (two power modules slots
PWR0 and PWR1)
• PSR150-A1
• PSR150-D1
F1090 (two power modules slots PWR0
and PWR1)
• PSR250-12A1
• PSR450-12AHD
• PSR450-12D
To Next Page
Loading...
Need help?
General
