H3C SecPath F5030

33
Field Description
Swap Swap memory.
Displaying the operational status of power
modules
Use the display power command to display the operational status of power modules.
<Sysname> display power
Slot 1 Power 0 Status: Normal
Slot 1 Power 1 Status: Absent
Table 13 Output description
Field Description
Power Number of the power module.
Status
Power module state:
• Normal—The power module is operating correctly.
• Absent—The power module is not in position.
• Abnormal—The power module has failed.
Displaying the temperature information of the
firewall
Use the display environment command to display the temperature information of the firewall.
<Sysname> display environment
System Temperature information (degree centigrade):
--------------------------------------------------------------------------------
---------
Slot Sensor Temperature LowerLimit Warning-UpperLimit Alarm-UpperLimit S
hutdown-UpperLimit
1 inflow 1 36 0 60 70
NA
1 inflow 2 34 0 60 70
NA
1 outflow 1 42 0 60 70
NA
1 hotspot 1 62 0 80 92
NA
Table 14 Output description
Field Description
Slot Slot number of the interface module.