34
Field Description
Sensor
Temperature sensor:
• inflow—Air inlet vent temperature sensor.
• outflow—Air outlet vent temperature sensor.
• hotspot—Hotspot temperature sensor.
Temperature Current temperature.
LowerLimit Low temperature alarm threshold.
Warning-UpperLimit Warning-level high temperature alarm threshold.
Alarm-UpperLimit Alarm-level high temperature alarm threshold.
Shutdown-UpperLimit
Shutdown-level high temperature alarm threshold. The firewall automatically
powers off when the temperature exceeds this threshold.
Displaying the operational statistics of the firewall
When you perform routine maintenance or the system fails, you might need to view the operational
information of each functional module for locating failures. Typically you need to run
display
commands one by one. To collect more information one time, you can execute the
display
diagnostic-information
command in any view to display or save the operational statistics of
multiple functional modules of the firewall.
• Save the operational statistics of each functional module of the firewall:
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.tar.gz)[sda0:/diag.gz]:
Diagnostic information is outputting to sda0:/diag.gz.
Please wait...
Save successfully.
To view the diag.gz file:
a. Execute the
tar extract archive-file diag.tar.gz command in user view to
decompress the file.
b. Execute the
gunzip diag.gz command.
c. Execute the
more diag command.
d. Press Page Up and Page Down.
• Display the operational statistics for each functional module of the firewall:
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
===============================================
===============display clock===============
17:22:11 UTC Mon 08/21/2017
=================================================
…
To Next Page
Loading...
Need help?
General
