42
Figure 36 NSQM1GT4PFCA front view
(1) LED (2) 10/100/1000BASE-T copper Ethernet ports
(3) Captive screw (4) Ejector lever
Power module views
The firewall comes with power module slot PWR0 installed with a filler panel and power module slot
PWR1 empty. You can install two power modules to achieve 1+1 power redundancy or install only
one power module.
If two power modules are installed, you can hot swap a power module. If only one power module is
installed, power off the firewall before you remove the power module.
AC power module
Figure 37 AC power module front view
(1) Retaining latch (2) Handle
(3) Power receptacle
To Next Page
Loading...
Need help?
General
