H3C SecPath F5030 User Manual

46
GE copper port
Table 24 GE copper port specifications
Item Specification
Connector RJ-45
Standard compliance 802.3, 802.3u, and 802.3ab
Interface type MDI/MDI-X autosensing
Cable type Category 5 or higher twisted pair cable
Transmission distance 100 m (328.08 ft)
Interface speed and duplex mode
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
NOTE:
The media dependent interface (MDI) standard is typically used on the Ethernet port of network
adapters. The media dependent interface crossover (MDI-X) standard is typically used on hubs or
LAN switches.
GE fiber port
Table 25 GE fiber port specifications
Item Specification
Connector type LC
Transceiver module type SFP
Standard compliance 1000Base-X
Interface speed 1000 Mbps
Duplex mode Full duplex
Table 26 1000Base-X SFP transceiver module specifications (1)
Transceiver module
Central
wavelength
(nm)
Fiber mode
Fiber diameter
(µm)
Mode bandwidth
(MHz*km)
SFP-GE-SX-MM850-A 850 MMF
50/125
500
400
62.5/125
200
160
160
SFP-GE-LX-SM1310-A 1310
SMF 9/125 N/A
MMF
50/125 500/400
62.5/125 500
SFP-GE-LH40-SM1310 1310 SMF 9/125 N/A

H3C SecPath F5030 Specifications

General

Brand	H3C
Model	SecPath F5030
Category	Firewall
Language	English