Hach 2100AN - Absorbance and Transmittance Measurement Procedure; Color Measurement and Calibration Procedure

31
SECTION 3 OPERATION
3.1 Operational Controls and Indicators
Figure 6 illustrates the locations of all controls, indicators and other operational
features of the Model 2100AN Laboratory Turbidimeter. Information on the
functions of each of these features is provided in Table 1 and supplemented with
additional details in sections Section 3.1.1 through Section 3.1.11.
Figure 6 Model 2100AN Operating Features and Functional Descriptions
RANGE
ENTER
EDIT
2100AN Turbidimeter
LINE
FEED
SETUP
ENTER
SIGNAL
AVG
MODE
SAMPLE
RATIO
UNITS
Exit
FLOW
PRINT
CAL
ZERO
11
12
13
14
15
16
171
8
1
9
2
0
1
2
3
4
5
6
7
8910
Range Mode
AIR PURGE
RECORDER
REMOTE
20 PSIG MAX
WARNING:
FOR CONTINUED PROTECTION AGAINST FIRE
HAZARD, REPLACE ONLY WITH THE SAME TYPE
AND RATING OF FUSE
WARNING:
ADVERTISSEMENT:
WHEN PANEL IS REMOVE, EYE PROTECTION IS REQUIRED AND EXPOSED SURFACES
MAY CAUSE SEVERE BURNS.
LORSQUE LE PANNEAU EST RETIRE LE PORT DE LUNETTES DE PROTECTION
EST INDESPENSABLE ET LES SURFACES EXPOSEES PEUVENT CAUSER DE BRULEURES GRAVES.
AVERTISSEMENT: POUR UNE PROTECTION
CONTINUE CONTRE LE FEU REMPLACER LA
FUSIBLE PAR UNE DU MEMETYPE ET DE MEMES
CHARACTERISTIQUES
SERIAL I/O
T,1.6A, 250V
2523
24
27
2622
21