Hach 2100AN - Page 73

SECTION 6, continued
73
• Key in RMN [for recorder minimum (current units)], and press enter on the
computer keyboard. This action recalls the current recorder minimum value
programmedintothe2100AN.Keyin
RMN=XXXXXtosetanewrecorderminimum
value. Press enter on the computer keyboard to accept the new recorder
minimum value (the smallest recorder minimum value setting is 0).
• Key in RMX [for recorder maximum (current units)], and press enter on the
computer keyboard. This action recalls the current recorder maximum value
programmed into the 2100AN. Key in
RMX=XXXXX to set a new recorder
maximum value. Press enter on the computer keyboard to accept the new
recorder minimum value (the largest recorder maximum value setting is
10,000).
• Key in RTN (for recorder trim minimum), and press enter on the computer
keyboard. This action recalls the current recorder trim minimum value
programmed into the 2100AN. Key in
RTN=XXXXX to set a new recorder
trim minimum value. Press enter on the computer keyboard to accept the new
recorder trim minimum value (the smallest recorder trim minimum value
setting is 200).
• Key in RTX (for recorder trim maximum), and press ENTER on the computer
keyboard. This action recalls the current recorder trim maximum value
programmed into the 2100AN. Key in
RTX=XXXXX to set a new recorder
trim maximum value. Press enter on the computer keyboard to accept the new
recorder trim maximum value (the largest recorder trim maximum value
setting is 4800).
• Key in SAV (for signal average buffer size), and press enter on the computer
keyboard. This action recalls the current signal average buffer size
programmed into the 2100AN. Key in
SAV=XX to set a new signal average
buffer size. Press enter on the computer keyboard to accept the new signal
average buffer size (the default signal average buffer size is 10, and the
maximum signal average buffer size is 15).