Hach BioTector B3500C User Manual

Page 136
8.3.14 Password
OPERATION 0000
CALIBRATION 0000
DIAGNOSTICS 0000
COMMISSIONING 0000
SYSTEM CONFIGURATION 0000
 Password menu allows any number from 1 to 9999 to be set as
passwords for the Operation, Calibration, Diagnostics,
Commissioning and System Configuration menus (levels). When
the setting is 0000 (by default), the password is disabled.
 The higher level passwords can be used to access password
protected lower levels. For instance the DIAGNOSTICS
password can be used for access the OPERATION level. The
SYSTEM CONFIGURATION password can be used to access
the password protected OPERATION, CALIBRATION,
DIAGNOSTICS and COMMISSIONING levels.
8.3.15 Language
ENGLISH
DEUTSCH
FRANCAIS
 LANGUAGE menu allows the user to change the language of
the system if it is available in the software.
8.3.16 Hardware Configuration
 Hardware Configuration menus are for factory use only.

Hach BioTector B3500C Specifications

General

Brand	Hach
Model	BioTector B3500C
Category	Measuring Instruments
Language	English